Smart mode for TRON Energy: Energy back after every transfer
Smart mode keeps 131,000 Energy on your address and, after every transfer, delivers back what the transfer used, so the next one is covered too. You pay for each delivery: 3.21 TRX for 65,000 Energy (the recipient already holds USDT) or 6.42 TRX for 131,000 (a first-time recipient). That is a little more than a one-time order (1.24 TRX and 2.3 TRX): the difference pays for never ordering by hand. For a few transfers a month, one-time Energy is cheaper.How it works
Your own TRON address. There is nothing else to set: no amount and no threshold. No private key or seed phrase is involved.
Energy on the address
What it costs per transfer
How many USDT transfers a month do you send?
20 a month| One-time Energy | Smart mode | |
|---|---|---|
| When you pay | Once, before a transfer | For each delivery, after a transfer |
| What you do | Order before sending | Nothing after the setup |
| Recipient never held USDT | Order the larger amount (2.3 TRX) | Covered: 131,000 is delivered back (6.42 TRX) |
| Fits | A few transfers a month, or a batch now | Single transfers at any time |
Who needs it
Typical setups
A withdrawal bot
A customer asks for a withdrawal and the bot sends one transfer. Smart mode has the Energy on the address before the next request, and delivers it again after each one.A wallet or tip bot that sends on a click
One transfer at a time, at moments nobody can predict, to recipients that may never have held USDT: the 131,000 kept on the address covers them.Not this: bursts and batches
Smart mode takes no more than one transfer every 6 seconds. For a burst use auto-refill with a larger portion, or order Energy once for the batch.Limits, and how much to keep on the balance
Smart mode has no settings: it keeps 131,000 Energy on the address and delivers back what each transfer used, 65,000 or 131,000. No more than one transfer every 6 seconds. An address can have one smart-mode rule.The balance has to cover the next delivery of every running rule together: 3.21 TRX for the smaller delivery, or the dashboard refuses to start it. Each transfer then costs one delivery, so keep the balance for the transfers you expect: for 100 transfers to addresses that hold USDT, about 321 TRX. That is our advice, not a rule of the service. The low-balance alert below warns you before a rule pauses.
Start smart mode
What happens next
Enter the address. Smart mode asks for nothing else.
Create an account or sign in. The values are kept for you.
Confirm in the dashboard and top up the balance. Only then does the rule start.
What it looks like in the dashboard
Setting up smart mode with GetGas
Sign up and top up your balance. It has to cover the next delivery of all your running rules together.
In the dashboard open Buy Energy, “New automation”, and choose Smart mode.
Enter the address. That is all the form asks for.
Start it. Pause or remove the rule under Automations whenever you want.
How to check that it works
From code, and an alert before a rule pauses
A service can create, pause and remove these rules from code with an API key, and read every delivery in the same account. To hear about a low balance before a rule pauses, set a threshold under API & Keys → Webhook → Low balance alert in the dashboard. When a charge takes the balance below it, a signed balance.low event is sent to your webhook, and again every hour until you top up. It is a webhook, not an e-mail, so it needs a URL on your side.
FAQ
Questions about smart mode
Why is smart mode dearer than a one-time order?
Per transfer to a recipient that already holds USDT it is 3.21 TRX against 1.24 TRX for a one-time order, and 6.42 TRX against 2.3 TRX for a first-time recipient. The difference pays for the Energy being back on the address after each transfer, without an order before it.
Is unused Energy lost?
The Energy delivered stays on the address for its period and goes back after it. Smart mode delivers again after a transfer, so with no transfers there is nothing new to pay for.
What if I send several transfers at once?
Smart mode is made for one transfer at a time, no more than one every 6 seconds. For a burst, order Energy once for the whole batch, or use auto-refill.
Can I stop it, and is anything returned?
You can pause or remove the rule at any time in the dashboard under Automations. Deliveries already made are charged and not refunded; nothing further is charged once the rule is stopped.
Do I still need TRX on the address?
For the Energy, no. A transfer also uses about 345 Bandwidth, and every address gets 600 free per day; past that a little TRX is burned. The guide on sending USDT with no TRX in the wallet covers it.
What if my balance runs out?
The balance has to cover the next delivery of all your running rules together. When it no longer does, the newest rules pause by themselves and resume after you top up.
Does this work for a withdrawal from an exchange?
No. Energy has to be on the address that signs the transfer, and on an exchange that address is the exchange’s. It works for addresses you control.